스크류체결기

   스크류공급기

   전동드라이버

      - PLUTO SERIES
      - CA SERIES
      - CONTROLLER
      - TA SERIES

   에어드라이버

   SMART ARM

   TOOL STAND

   SPECIAL TOOLING

HOME > 제품소개 > KOLVER 전동드라이버

 

T&A Torque & Angle Series

Industrial tightening may require different control strategies and solutions. The most common cases are: torque control with angle monitoring and angle control with torque monitoring. Kolver Multi-Torque Torque&Angle controller can manage all such strategies, with up to 8 individual P-sets.

The Torque/Angle Control

The main parameters to be controlled are the tightening torque applied to the screw and the rotation angle of the screw, with priority to the torque value. If the torque and angle values found by the system are within the programmed settings, the motor stops automatically and the indication of OK cycle (green led turned on) is given, otherwise an error (red led) is generated.

The Angle Control

The main parameter to be controlled is the rotation angle of the screw. The motor stops automatically when the pre-set angle value has been reached and an indication of OK cycle (green led turned on) is given.

Main features:

• Easy to program user interface screens
• Password protected
• Torque value in Nm or In/lbs
• Angle value in degrees
• 8 individual P-sets for custom rundown strategies including:
- Min/Max torque value
- Min/Max angle value
- Rundown speed
- Slow start/Soft stop
- Hard/soft joint
- Min/Max rundown time
- Max Torque (Threadcutting) if required
- Auto reverse if required
• 6 torque & angle strategies:
- Torque priority: angle count from torque threshold (T) or from remote input (T/I) or from lever input (T/L)
- Angle priority: driver stops when angle is reached from threshold torque (A) or from remote input (A/I) or from lever (A/L) IMPORTANT: Continuous use over 80% of torque range is not recommended.

 

Model Code Torque Nm SOFT Torque Nm HARD RPM min RPM max To be used witd
PLUTO3D/TA
130203/TA 0,3-2,0 0,3-3,0 370 1200 EDU2AE/TOP/TA
PLUTO3P/TA
130207/TA 0,3-2,0 0,3-3,0 370 1200 EDU2AE/TOP/TA
PLUTO3CA/TA 130303/TA 0,3-2,0 0,3-3,0 370 1200 EDU2AE/TOP/TA
PLUTO6D/TA 130206/TA 0,5-6,0 0,5-8,0 200 920 EDU2AE/TOP/TA
PLUTO6P/TA 130207/TA 0,5-6,0 0,5-8,0 200 920 EDU2AE/TOP/TA
PLUTO10D/TA 130211/TA 2,0-8,0 1,5-10,0 110 600 EDU2AE/TOP/TA
PLUTO10P/TA 130210/TA 2,0-8,0 1,5-10,0 110 600 EDU2AE/TOP/TA
PLUTO10CA/TA 133211/TA 2,0-8,0 1,5-10,0 110 600 EDU2AE/TOP/TA
PLUTO15D/TA 130216/TA 2,0-15,0 2,0-15,0 60 320 EDU2AE/TOP/TA
PLUTO15P/TA 130215/TA 2,0-15,0 2,0-15,0 60 320 EDU2AE/TOP/TA
PLUTO15CA/TA 133216/TA 2,0-15,0 2,0-15,0 60 320 EDU2AE/TOP/TA
PLUTO20CA/SR/TA 133221/SR/TA 2,0-18,0 2,0-20,0 40 210 EDU2AE/TOP/TA
PLUTO35CA/SR/TA 133236/SR/TA 2,0-35,0 2,0-35,0 40 140 EDU2AE/TOP/TA
EDU2AE/TOP/TA 031000/TOP/TA         Any PLUTO../TA

 

 

경기도 안양시 동안구 호계동  555-9 디오밸리 B132  (주) 세림기전
TEL : 031-479-6144   FAX : 479-6146   Contact to E-Mail : info@serimemc.com
Serim Co.,Ltd. All rights reserved. For more information mail to check@serimemc.com